Switch and Wiring

Products: 112 of 123
  • Vintage Automotive Car Truck Fender Quarter Panel Chrome Spiral Curb Feelers Pr
    THIS IS FOR A NEW SET OF CHROME CHROME FEELERS. - 4 PIECES ON 11-3/4" FLEX WIRE WITH CLAMPS - MOUNTS TO QUARTER PANEL WITH INCLUDED CLAMPS - USED TO PREVENT CURB DAMAGE TO BODY AND WHEELS
    • $17.97
  • Vintage Automotive Car Truck Fender Quarter Panel Chrome Spiral Curb Feelers Pr
    THIS IS FOR A NEW SET OF CHROME CHROME FEELERS. - 4 PIECES ON 11-3/4" FLEX WIRE WITH CLAMPS - MOUNTS TO QUARTER PANEL WITH INCLUDED CLAMPS - USED TO PREVENT CURB DAMAGE TO BODY AND WHEELS  
    • $17.97
  • Vintage Automotive Car Truck Fender Quarter Panel Chrome Spiral Curb Feelers Pr
    THIS IS FOR A NEW SET OF CHROME CHROME FEELERS. - 4 PIECES ON 11-3/4" FLEX WIRE WITH CLAMPS - MOUNTS TO QUARTER PANEL WITH INCLUDED CLAMPS - USED TO PREVENT CURB DAMAGE TO BODY AND WHEELS
    • $17.97
  • Vintage Automotive Car Truck Fender Quarter Panel Chrome Spiral Curb Feelers Pr
    THIS IS FOR A NEW SET OF CHROME CHROME FEELERS. - 4 PIECES ON 11-3/4" FLEX WIRE WITH CLAMPS - MOUNTS TO QUARTER PANEL WITH INCLUDED CLAMPS - USED TO PREVENT CURB DAMAGE TO BODY AND WHEELS
    • $17.97
  • Vintage Automotive Car Truck Fender Quarter Panel Chrome Spiral Curb Feelers Pr
    THIS IS FOR A NEW SET OF CHROME CHROME FEELERS. - 4 PIECES ON 11-3/4" FLEX WIRE WITH CLAMPS - MOUNTS TO QUARTER PANEL WITH INCLUDED CLAMPS - USED TO PREVENT CURB DAMAGE TO BODY AND WHEELS
    • $17.97
  • Classic Vintage Spiral Chrome Fender Quarter Panel Curb Feelers Whiskers Savers
    Classic Vintage Spiral Chrome Quarter Panel / Fender Curb Feelers Clamp Bolt On Curb Finder Wheel / Body Saver GuidesVintage Spiral Chrome Curb FeelersHelps to Prevent Wheel & Fender DamageInstallation Hardware IncludedGreat For Hot Rods & Custom ClassicsPair
    • $17.67
    Backorder available
  • 1947-1971 Chevy Ford Car Truck Chrome Vented Locking Gas Fuel Cap w/ 2-Keys
    ATTENTION!!! You need to measure your inside diameter of your gas fill to verify that this gas cap will fit your vehicle it should measure between 1-1/2" & 1-3/4". The outside diameter of the gas cap is 2-1/2".   1947-1971 Ford & Chevy Chrome Locking Gas Cap This cap is chrome plated, vented and comes with two keys.   Best Quality Chrome Plated Gas Cap For  Chevy Or GMC Truck Highly Polished Chrome Very Close In Appearance To Late Model  Dealer Installed Locking Gas Cap Includes Two Keys Outer Diameter is 2-1/2"   This cap fits the following 1958-1959-1960-1961-1962-1963 Chevrolet Pick-Up Trucks 1947-1948-1949-1950-1951-1952-1953-1954-1955-1956-1957-1958-1959-1960-1961-1962-1963-1964-1965-1966-1967-1968-1969-1970-1971 Chevrolet Pick-Up Trucks 1949-1950-1951-1952-1953-1954-1955-1956-1957-1958-1959-1960-1961-1962-1963-1964-1965-1966-1967-1968-1969-1970 Ford Pick-Up Trucks 1957-1958-1959-1960-1961-1962-1963-1964-1965-1966-1967-1968-1969-1970 Ford Pick-Up Trucks Locking gas caps are an integral part of every automobile. When it comes to the gas tank, security and integrity are paramount. The gas cap is vital in preventing corrosion, delivering pressurized gas to the fuel pump, and keeping harmful carcinogens inside the tank and impurities out. Octane Lighting offers gas caps to fit your 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, and 1971 Chevy truck. Ensure peace of mind by providing your classic with a locking gas cap. The chrome finish displays authenticity and class. This locking gas cap provides locking security and safety at an affordable price, and is available at Octane Lighting today! ATTENTION!!! You need to measure your inside diameter of your gas fill to verify that this gas cap will fit your vehicle it should measure between 1-1/2" & 1-3/4". The outside diameter of the gas cap is 2-1/2".
    • $19.95
    Backorder available
  • 7" Inch Round Motorcycle Crystal Clear Green LED Halo Headlight Bulb Fits Harley
    p.p1 {margin: 0.0px 0.0px 8.0px 0.0px; font: 17.0px Helvetica; color: #000000} p.p2 {margin: 0.0px 0.0px 8.0px 15.0px; font: 17.0px Helvetica; color: #000000} span.s1 {font-family: "Helvetica"; font-weight: normal; font-style: normal; font-size: 17.00pt} 7" round headlight for Harley motorcycles that use a 7" headlight. • 7" crystal clear headlight • Green led halo or turn signals • LEDs are wired separately so can be used as left and right signal or wire together for full halo • Includes 12v 55/60w super white bulb • Glass lens • DOT SAE approved
    • $39.95
  • Classic Vintage Spiral Chrome Fender Quarter Panel Curb Feelers Whiskers Savers
    Classic Vintage Spiral Chrome Quarter Panel / Fender Curb Feelers Clamp Bolt On Curb Finder Wheel / Body Saver GuidesVintage Spiral Chrome Curb FeelersHelps to Prevent Wheel & Fender DamageInstallation Hardware IncludedGreat For Hot Rods & Custom ClassicsPair
    • $18.52
    Backorder available
  • Classic Vintage Spiral Chrome Fender Quarter Panel Curb Feelers Whiskers Savers
    Classic Vintage Spiral Chrome Quarter Panel / Fender Curb Feelers Clamp Bolt On Curb Finder Wheel / Body Saver GuidesVintage Spiral Chrome Curb FeelersHelps to Prevent Wheel & Fender DamageInstallation Hardware IncludedGreat For Hot Rods & Custom ClassicsPair
    • $18.52
    Backorder available
  • Blue Chrome Antenna Topper Vintage Classic Custom Hot Rat Rod Lowrider Car Truck
    Vintage Blue Chrome Antenna TopperChrome Plated Die Cast Blue InsertClassic Art Decco DesignEasily Mounts To Most Antennas Mounting Hardware and Tool IncludedCustom Look For Your Classic Car or Truck
    • $14.95
    Backorder available
  • Chrome "Streetmachine" Emblem Script Universal Fit Show Car Truck Hot Street Rod
    "Streemachine" Die Cast Script Emblem3 Stud Mount For Easy InstallationUniversal ApplicationApproximately 8.25" x 2"3 Clips for Mounting IncludedExcellent Chrome ShineEasily Customize Your Vehicle
    • $13.95
    Backorder available
Products: 112 of 123
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 8" CHROME Dome Style Truck Rear Hub Cap Wheel Cover Each Fits Kenworth Peterbilt
    NEW CHROME 8" DOME STYLE SEMI TRUCK REAR WHEEL HUB CAP - SINGLE DIAMETER: 8" (Will Fit Any Standard 8" Wheel / 8 1/2" Axle)INSTALLATION: Easy Installation and Secure (8 of 5/8" Studs)MATERIAL: Chrome FinishFITMENT: Universal Fitment for 8" Rear WheelsQUANTITY: 1 (ONE) New Hub Cap
    • $8.97
  • Vintage Automotive Car Truck Fender Quarter Panel Chrome Spiral Curb Feelers Pr
    THIS IS FOR A NEW SET OF CHROME CHROME FEELERS. - 4 PIECES ON 11-3/4" FLEX WIRE WITH CLAMPS - MOUNTS TO QUARTER PANEL WITH INCLUDED CLAMPS - USED TO PREVENT CURB DAMAGE TO BODY AND WHEELS
    • $17.97
  • 3" x 3" Blue Plush Fuzzy Dice Hanging Rear View Mirror Vintage Hotrod Streetrod
    3" x 3" CLASSIC FUZZY DICE - BLUE BLUE
    • $10.95
    Backorder available
  • Gun Magnet Mount Pistol Magnetic Holder Car Holster Trigger Protection Desk Car
    Gun Magnet with Safety Trigger Guard Protection, Concealed Gun Magnet Mount Rated Max up to 15 LBS for Most Guns, Magnetic Gun Mount for Vehicle, Car, Truck, Wall, Safe, DeskPlastic and rubberImportedTRIGGER PROTECTION DESIGN - The Gun Magnet is an innovative gun accessory that combines a magnetic gun rack with trigger protection. It fully covers the trigger and provides additional protection from accidental discharge. The trigger protection also provides additional support to make the gun safer. OCTANE gun magnet mount is perfectly sized (4.13 inches*3.54 inches*1.57 inches), which can helps to maximize the space allocation in the gun safe.TRIGGER PROTECTION DESIGN - The Gun Magnet is an innovative gun accessory that combines a magnetic gun rack with trigger protection. It fully covers the trigger and provides additional protection from accidental discharge. The trigger protection also provides additional support to make the gun safer. OCTANE gun magnet mount is perfectly sized (4.13 inches*3.54 inches*1.57 inches), which can helps to maximize the space allocation in the gun safe.SUPERIOR MAGNETIC TECHNOLOGY - This gun mount contains 2 inner magnets made up of Neodyium, which is a rare raw earth metal material that greatly improves our mount’s magnetic force and ability to bear the weight of up to 15lbs, which perfectly sized to fit in offices, checkout counters, bedsides, doorways, desks, tables, etc. This magnetic gun mount will help you conceal the gun well.FIXED AND DOES NOT ROTATE - Our magnetic gun rack is designed to keep your gun from rotating or moving even when attached to a vehicle. Designed with safety in mind, our gun magnetic mount has built in braces to stabilize your weapon and prevent damage. Our gun magnet mount is made up of ABS and rubber material, which has a smooth surface to prevent scratches to your gun. Protect your investment with a high quality gun mount.COMPATIBLE DESIGNS FOR MOST PISTOL MODELS - Our gun magnet fit most gun manufacturers including Glock, Smith & Wesson, Browning, Walther, Taurus, Beretta, Sig Sauer, Colt, Ruger, Kel Tec, Heckler & Koch, Remington, Winchester, Mossberg, Rossi, FN Herstal, etc. Please check the size of the for your gun before order.EASY INSTALLATION - OCTANE Gun Magnet Mount include Adhesive, 4 long screws(1.18 inch), 4 short screws(1.57 inch), and 8 expansion screws. Providing customers with fast, easy and safe installation. Please use both screws and adhesive during installation.
    • $14.95
    Out of stock

Browse by Vehicle