Switch and Wiring

  • Switch and Wiring
  • Lighting
  • 5-3/4" Sealed Beam Incandescent Glass Hi & Low Headlight Headlamp Bulbs Set of 4
    THESE ARE SEALED BEAM INCANDESCENT (FILAMENT) GLASS HEADLIGHTS - SET OF 4   SET OF 4 5.75" HEADLIGHTS( 2 ) - LOW/HIGH BEAMS 37.5/60 WATTS( 2 ) - 2-HIGH BEAMS 50 WATTSDIRECT REPLACEMENTSTOCK OE REPLACEMENTSPLUG AND PLAY(2) OL-4000 & (2) OL-5001   THIS LISTING IS FOR A SET OF 4 NEW 5-3/4" GLASS INCANDESCENT HEADLIGHT BULBS. THIS SET INCLUDES 2 HIGH BEAM & 2 HIGH / LOW BEAM HEADLIGHTS. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. NO WIRING UPGRADES, SPECIAL RELAYS OR HEADLIGHT BUCKET MODIFICATIONS ARE NEEDED TO RUN THESE OE REPLACEMENT HEADLIGHTS. THESE ARE CORRECT FOR ANY CAR OR TRUCK THAT HAS 4 ROUND GLASS HEADLIGHTS. EACH BULB IS 5 3/4 INCHES IN DIAMETER. 
    • $69.95
    Out of stock
  • 5-3/4" Sealed Beam Incandescent Glass Hi & Low Headlight Headlamp Bulbs Set of 4
    THESE ARE SEALED BEAM INCANDESCENT (FILAMENT) GLASS HEADLIGHTS - SET OF 4   SET OF 4 5.75" HEADLIGHTS( 2 ) - LOW/HIGH BEAMS 37.5/60 WATTS( 2 ) - 2-HIGH BEAMS 50 WATTSDIRECT REPLACEMENTSTOCK OE REPLACEMENTSPLUG AND PLAY(2) OL-4000 & (2) OL-5001   THIS LISTING IS FOR A SET OF 4 NEW 5-3/4" GLASS INCANDESCENT HEADLIGHT BULBS. THIS SET INCLUDES 2 HIGH BEAM & 2 HIGH / LOW BEAM HEADLIGHTS. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. NO WIRING UPGRADES, SPECIAL RELAYS OR HEADLIGHT BUCKET MODIFICATIONS ARE NEEDED TO RUN THESE OE REPLACEMENT HEADLIGHTS. THESE ARE CORRECT FOR ANY CAR OR TRUCK THAT HAS 4 ROUND GLASS HEADLIGHTS. EACH BULB IS 5 3/4 INCHES IN DIAMETER. 
    • $69.95
    Out of stock
  • 5-3/4" 5.75 Sealed Beam Glass Hi & Low Headlight Headlamp Head Light Bulbs Set 4
    THESE ARE SEALED BEAM INCANDESCENT GLASS HEADLIGHTS, NOT PLASTIC! THIS LISTING IS FOR A SET OF 4 NEW 5-3/4" GLASS INCANDESCENT HEADLIGHT BULBS. THESE INCANDESCENT SEALED BEAMS ARE THE SAME STYLE YOUR CAR CAME WITH WHEN IT WAS NEW. THIS SET INCLUDES 2 HIGH BEAM & 2 HIGH / LOW BEAM HEADLIGHTS. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. THESE ARE CORRECT FOR ANY CAR OR TRUCK THAT HAS 4 ROUND GLASS HEADLIGHTS. EACH BULB IS 5 3/4 INCHES IN DIAMETER. THESE ARE GLASS AND WE WILL TAKE EXTRA CARE IN PACKAGING.   
    • $89.95
    Out of stock
  • 5-3/4" Sealed Beam Incandescent Glass Hi & Low Headlight Headlamp Bulbs Set of 4
    THESE ARE SEALED BEAM INCANDESCENT (FILAMENT) GLASS HEADLIGHTS - SET OF 4   SET OF 4 5.75" HEADLIGHTS( 2 ) - LOW/HIGH BEAMS 37.5/60 WATTS( 2 ) - 2-HIGH BEAMS 50 WATTSDIRECT REPLACEMENTSTOCK OE REPLACEMENTSPLUG AND PLAY(2) OL-4000 & (2) OL-5001   THIS LISTING IS FOR A SET OF 4 NEW 5-3/4" GLASS INCANDESCENT HEADLIGHT BULBS. THIS SET INCLUDES 2 HIGH BEAM & 2 HIGH / LOW BEAM HEADLIGHTS. THESE HAVE THE ORIGINAL SHAPED PRONGS ON THE BACK SO THEY WILL PLUG RIGHT INTO YOUR ORIGINAL WIRING HARNESS PLUGS. NO WIRING UPGRADES, SPECIAL RELAYS OR HEADLIGHT BUCKET MODIFICATIONS ARE NEEDED TO RUN THESE OE REPLACEMENT HEADLIGHTS. THESE ARE CORRECT FOR ANY CAR OR TRUCK THAT HAS 4 ROUND GLASS HEADLIGHTS. EACH BULB IS 5 3/4 INCHES IN DIAMETER. 
    • $69.95
    Out of stock
  • 8" CHROME Dome Style Truck Rear Hub Cap Wheel Cover Each Fits Kenworth Peterbilt
    NEW CHROME 8" DOME STYLE SEMI TRUCK REAR WHEEL HUB CAP - SINGLE DIAMETER: 8" (Will Fit Any Standard 8" Wheel / 8 1/2" Axle)INSTALLATION: Easy Installation and Secure (8 of 5/8" Studs)MATERIAL: Chrome FinishFITMENT: Universal Fitment for 8" Rear WheelsQUANTITY: 1 (ONE) New Hub Cap
    • $8.97
  • Vintage Automotive Car Truck Fender Quarter Panel Chrome Spiral Curb Feelers Pr
    THIS IS FOR A NEW SET OF CHROME CHROME FEELERS. - 4 PIECES ON 11-3/4" FLEX WIRE WITH CLAMPS - MOUNTS TO QUARTER PANEL WITH INCLUDED CLAMPS - USED TO PREVENT CURB DAMAGE TO BODY AND WHEELS
    • $17.97
  • 3" x 3" Blue Plush Fuzzy Dice Hanging Rear View Mirror Vintage Hotrod Streetrod
    3" x 3" CLASSIC FUZZY DICE - BLUE BLUE
    • $10.95
    Backorder available
  • Gun Magnet Mount Pistol Magnetic Holder Car Holster Trigger Protection Desk Car
    Gun Magnet with Safety Trigger Guard Protection, Concealed Gun Magnet Mount Rated Max up to 15 LBS for Most Guns, Magnetic Gun Mount for Vehicle, Car, Truck, Wall, Safe, DeskPlastic and rubberImportedTRIGGER PROTECTION DESIGN - The Gun Magnet is an innovative gun accessory that combines a magnetic gun rack with trigger protection. It fully covers the trigger and provides additional protection from accidental discharge. The trigger protection also provides additional support to make the gun safer. OCTANE gun magnet mount is perfectly sized (4.13 inches*3.54 inches*1.57 inches), which can helps to maximize the space allocation in the gun safe.TRIGGER PROTECTION DESIGN - The Gun Magnet is an innovative gun accessory that combines a magnetic gun rack with trigger protection. It fully covers the trigger and provides additional protection from accidental discharge. The trigger protection also provides additional support to make the gun safer. OCTANE gun magnet mount is perfectly sized (4.13 inches*3.54 inches*1.57 inches), which can helps to maximize the space allocation in the gun safe.SUPERIOR MAGNETIC TECHNOLOGY - This gun mount contains 2 inner magnets made up of Neodyium, which is a rare raw earth metal material that greatly improves our mount’s magnetic force and ability to bear the weight of up to 15lbs, which perfectly sized to fit in offices, checkout counters, bedsides, doorways, desks, tables, etc. This magnetic gun mount will help you conceal the gun well.FIXED AND DOES NOT ROTATE - Our magnetic gun rack is designed to keep your gun from rotating or moving even when attached to a vehicle. Designed with safety in mind, our gun magnetic mount has built in braces to stabilize your weapon and prevent damage. Our gun magnet mount is made up of ABS and rubber material, which has a smooth surface to prevent scratches to your gun. Protect your investment with a high quality gun mount.COMPATIBLE DESIGNS FOR MOST PISTOL MODELS - Our gun magnet fit most gun manufacturers including Glock, Smith & Wesson, Browning, Walther, Taurus, Beretta, Sig Sauer, Colt, Ruger, Kel Tec, Heckler & Koch, Remington, Winchester, Mossberg, Rossi, FN Herstal, etc. Please check the size of the for your gun before order.EASY INSTALLATION - OCTANE Gun Magnet Mount include Adhesive, 4 long screws(1.18 inch), 4 short screws(1.57 inch), and 8 expansion screws. Providing customers with fast, easy and safe installation. Please use both screws and adhesive during installation.
    • $14.95
    Out of stock

Browse by Vehicle