(855) 962-8263

Lighting

Products: 1–12 of 44
Show: 12
Sort by: Recommended
  • 12V -32V Computer Canceler Harness for Canbus Error Free Function Race Sport Lighting
    12V -32V Computer Canceler Harness for Canbus Error Free Function Race Sport Lighting
    Computer error prevention cables eliminate dash lights and warnings that are common with aftermarket lighting installations. 1 Year Warranty Details: 12V -32V Computer Canceler Harness for Canbus Error Free Function Computer error prevention cables Eliminate dash lights and warnings that are common with aftermarket lighting installations 1 Year Warranty
    • $6.99
    10 left in stock. Backorder available
  • NextGen 7 Inch LL Series LED and Laser Sealed Beam Auxiliary Work Lights Pair Race Sport Lighting
    NextGen 7 Inch LL Series LED and Laser Sealed Beam Auxiliary Work Lights Pair Race Sport Lighting
    The new LL Series 7-inch spot lights from Race Sport Lighting provide up to over 1-mile of light range down the road for extreme off roading safety generated by our long range laser illumination light scope in the middle of the spot light. Which means that you can see farther down the path in any off-road adventure, or situation where your work truck is moving loads at night down dark never ending roads with no street lights, therefore getting your precious cargo to the point of destination safer and allowing you 10 times as much stopping distance to obstructions. The Laser + LED spot lights have the high power LED diodes you trust in the opticals for the wide range, PLUS a Laser light scope in the middle for a very focused straight beam that travels as far as 1.2 miles down the road or path. This is the 1st generation of premium dual function laser spot lights released by Race Sport lighting as we continue to strive to provide functional work lights that people can use in their adventures and travels in secluded destinations. The heavy duty construction will give you years of use, and the LED + Laser light sources will give you the safety you need and deserve out of an auxiliary light. Our spots have lasers that have been registered with the FDA, and are great for many offroad and on road excursions. The Laser produces a white Illumination beam that is super focused for long distances down the road. Because of the extreme power of these spot lights, it is not recommended to use these on road in congested areas with other cars in every day driving situations.
    • $704.99
    10 left in stock. Backorder available
  • H4-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting
    H4-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting
    H4-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting Details: H4-3 Bixenon Harness Hi/lo Controller Cables For Xenon HID systems Sold as Pairs
    • $35.99
    10 left in stock. Backorder available
  • H13-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting
    H13-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting
    H13-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting Details: H13-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs
    • $6.99
    10 left in stock. Backorder available
  • 9007-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID Systems Sold as Pairs Race Sport Lighting
    9007-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID Systems Sold as Pairs Race Sport Lighting
    9007-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs Race Sport Lighting Details: 9007-3 Bixenon Harness Hi/lo Controller Cables for Xenon HID systems Sold as Pairs
    • $17.99
    10 left in stock. Backorder available
  • 9007 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    9007 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Details: Great for Jeeps of all years and vintage vehicles Sold individually One harness handles both left and right headlamps 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • 9004 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    9004 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Great for Jeeps of all years and vintage vehicles. Sold individually. One harness handles both left and right headlamps. 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • H13 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    H13 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Details: Great for Jeeps of all years and vintage vehicles. Sold individually. One harness handles both left and right headlamps 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • H4 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    H4 Bixenon Interface Harness for LED Conversions Race Sport Lighting
    This Race Sport Lighting relay harness is most commonly used in aftermarket LED or HID conversions to bypass the factory wiring in order to get around complicated electronic control systems or to allow a higher rate of current to be delivered to the kits. This relay harness utilizes a 30A fuse-protected power wire that directly connects to your positive terminal on the battery. An automotive relay is used to pull signal from your headlight connector to trigger power to be drawn from the battery. This insures that your LED or HID headlight conversion is receiving proper uninterrupted power. This can also be used with OEM halogen bulbs to provide better voltage. Details: Great for Jeeps of all years and vintage vehicles Sold individually One harness handles both left and right headlamps 1 Year Warranty
    • $36.99
    10 left in stock. Backorder available
  • 9007 Plug-and-Play Interface Cable w/ 2 resistors Pair Race Sport Lighting
    9007 Plug-and-Play Interface Cable w/ 2 resistors Pair Race Sport Lighting
    These dual load resistors prevent the computer from faulting when aftermarket 9007 Bixenon LED or HID kits are installed, preventing unwanted error lights. Simple Plug-N-Play design. Load Resistors must be mounted to metal and not plastic or other easily melted materials. Sold in pairs. 1 Year Warranty Details: Dual load resistors prevent the computer from faulting when aftermarket 9007 Bixenon LED or HID kits are installed Prevents unwanted error lights. Simple Plug-N-Play design Load Resistors must be mounted to metal and Not plastic or other easily melted materials Sold in pairs 1 Year Warranty
    • $35.99
    10 left in stock. Backorder available
  • H13 Plug-and-Play Interface Cable w/ 2 resistors Pair Race Sport Lighting
    H13 Plug-and-Play Interface Cable w/ 2 resistors Pair Race Sport Lighting
    These dual load resistors prevent the computer from faulting when aftermarket H13 Bixenon LED or HID kits are installed, preventing unwanted error lights. Simple Plug-N-Play design. Load Resistors must be mounted to metal and Not plastic or other easily melted materials. Sold in pairs. 1 Year Warranty Details: Dual load resistors prevent the computer from faulting when aftermarket H13 Bixenon LED or HID kits are installed Simple Plug-N-Play design. Load Resistors must be mounted to metal and Not plastic or other easily melted materials. Sold in pairs. 1 Year Warranty
    • $35.99
    10 left in stock. Backorder available
  • 12V Relay Harness w/ Capacitors Race Sport Lighting
    12V Relay Harness w/ Capacitors Race Sport Lighting
    Heavy duty, multi-purpose interface harness for our HID or LED kits. On vehicles with daytime running lights, this harness will retain the daytime running light function, On vehicles with 6-11V, the trigger input on this harness will handle the lower voltage and keep the relay open. On vehicles with pulsed voltage instead of a steady voltage, the trigger input on this harness will handle the pulsed voltage and keep the relay open. Note: When installing this harness be aware of the polarity, make sure 12C+ and Ground on the vehicles light plug matches up with 12V+ and Ground on the trigger plug on our harness. Failure to do so will impair correct operation and may damage the harness. 1 Year Warranty Details: Heavy duty, multi-purpose interface harness for our HID or LED kits On vehicles with daytime running lights, this harness will retain the daytime running light function On vehicles with 6-11V, the trigger input on this harness will handle the lower voltage and keep the relay open On vehicles with pulsed voltage instead of a steady voltage, the trigger input on this harness will handle the pulsed voltage and keep the relay open 1 Year Warranty
    • $33.99
    10 left in stock. Backorder available
Products: 1–12 of 44
Show: 12
New arrivals
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Amber Flush Mount Rear Tail Brake Light Lens Assembly Set of 4 for 59 Cadillac
    Octane LightingSET OF 4 - Amber Flush Mount Tail Light Lens Assembly for 59 CadillacSET OF 4 New Amber Tail Light Lens Assembles12v 1157 Bulbs IncludedAmber Polycarbonate LensesSimple 3-Wire HookupTail Lamp / Brake FunctionsFully Sealed ElectronicsEasy Surface Mounting w/ 2 StudsMounting Hardware & Gaskets IncludedFits 1959 Cadillac CarsQty: 4 (Four) AssembliesWe Also Have These Assemblies Available Individually in Our Store
    • $139.95
    1 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.
  • 5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    5-3/4" Motorcycle Stock 6v LED Headlamp w/ Chrome Moto Bucket Bottom Mount EACH
    ONE - NEW - MOTORCYCLE 5-3/4" INCH ROUND STOCK GLASS HEADLAMP & CHROME METAL HOUSING INCLUDES (1) HIGH INTENSITY 6v 3RD GENERATION LED H4 INTENSE WHITE LIGHT BULB! - Fits Harley Davidson Motorcycle with 5.75" Headlight Buckets - One New 6-Volt LED Headlight w/ Moto Bucket SAE/DOT Approved - Street LegalDurable Chrome Bucket w/ Wiring & PlugBottom Stud Mounted BucketChrome Finish2600 Lumen Low Beam / 4000 Lumen High BeamDaylight White Brightness360° Light Beam AngleBrighter and Whiter than Stock Headlights High & Low Beam Function LED Bulb Works with Factory Wiring Original 3 Prong Plug Design (Plug & Play) High Quality Stock Style Glass Faced & Metal Backed Semi-Sealed Beam - Removable / Replaceable Light Bulbs Direct Replacement for Stock Headlights Fits Motorcycles with 5-3/4" Round Headlight Housing This listing is for one new 5.75" round 6 volt high/low beam stock style H4 conversion 3rd Generation LED motorcycle headlight with a chrome headlight bucket. Includes one 3rd Gen LED Xenon 6500k super white LED bulb. This is a glass faced headlight. These are very good quality and very bright! These headlights have a domed clear glass face unlike all all the others on the market that have a flat plastic face. These light up much brighter and whiter than the standard stock style incandescent headlight bulbs. These have the original 3 prong plug design on the back so they will plug right into the original wiring harness (no wiring modification needed). These will fit motorcycles that have 5.75 inch in diameter headlight buckets with stud mounts. Bucket is metal with a chrome finish and a bottom stud mount.  We will take extra care in packaging. Octane Lighting GEN 3 All-In-One H4 LED Headlight Bulbs: 2,600 / 4,000 Lumen Bulbs 2,600 / 4,000 LUMENS PER BULB! The LED conversion kit to rival HID power is finally here! The Octane Lighting Gen 3 LED conversion kits come in all different headlight and fog light bulb styles. Not only are the new GEN 3 LED conversion kits as bright as an HID system, but the new design from Octane Lighting, does not require a relay or harness or special drivers. The GEN 3 LED conversion kits from Octane Lighting have the driver built in to the bulb, which means there are no external parts to mount or plug in, just replace your old halogen bulbs with the new ones and plug them in like the originals. The new GEN 3 LED conversion kits from Octane Lighting are the brightest on the market! Each dual beam LED bulb produces 2,600 Lumens of light and draws 26 watts of energy on the low beam setting; but produces 4,000 Lumens of light and draws 40 watts of energy on the high beam setting. LED LIGHT BULBSpecifications and Features: 2,600 Lumens Low Beam / 4,00 Lumens High Beam Light Output Per Bulb360 Degree Light Beam Angle26 Watts Low Beam / 40 Watts High Beam Energy Usage Per BulbLED Light Color: 6,500KWeatherproof Rating: IP68Waterproof Ball-Bearing Fan for CoolingNewest Technology All-In-One Design: No Ballast or Driver RequiredLED Protection Circuit to Protect from Reverse Polarity, Low Voltage or High Voltage SpikesSmart & Efficient Cooling System Uses Built-In Cooling FanGreater Visibility - 3x Brighter than Factory Halogen BulbsHigh Luminous Efficacy Flux: 2,600/4,000lmHigh Quality Aluminum Heat Sink Ensures Proper Temperature RegulationLower Power Consumption than Halogen BulbsVibration Proof Design30,000 Hour LifespanEasy Plug & Play Installation - No Modification RequiredNo Splicing of Harnesses Required for LED BulbsUses 75% LESS Power than Halogen or HID Bulbs3x Brighter than Stock Halogen BulbsOBC Error Free OperationDramatically Improves Visibility at Night SAE & DOT APPROVED
    • $79.95
    2 left in stock.

Browse by Vehicle